Management through handheld detection for the stages of casting and intermediate stages
Track Palm allows full management of the data collection of production to the stage of glazing. Its mobility makes it especially efficient to manage the process of casting. In this phase can indeed do the following:
• Load line casting. E 'possible to combine a range of casting moulds used in it and determine their position. E 'possible to load or the simple replacement of one or ore moulds.
• Management of the collection phase of casting with the following specifications: Indicating the date, the line, and the operator. Possibility of including the no-work of the line, provided the motivation. Detection of products by casting through the normal method (reading of the mould for the definition of semi-finished and semi registration number applied to itself) or sequentially with the proposed automatic mould (depending on the load line) and the only reading of the label applied to the semi. For each piece can be detected to indicate the possible defect. It is possible failure to disclose to each casting mould with the inclusion of motivation.
• Control of readings made by the load line with reference to any moulds unread.
• Parameterization of the detection method defined terminal to terminal. It can also make the detection of all other stages of production (finishing, inspection, glazing, etc.).. In these phases, the procedure is simpler and more streamlined because it is simply reading the serial number of the semi and possibly indicate the defect. The procedure is installed on each terminal, and operates independently from the main system. This ensures continuity of work even in the event of temporary shutdown. It is a system of semi-automatic backup and restore the terminal in case of replacement or reprogramming of the terminal.